This Deep Deal Tray has a sliding lid to help minimize heat or cooling loss, fire rating requirements, and offers extra protection. The lid has a full width flange across the rear that acts as a handle, and slides quietly. The deep tray allows items up to 2-3/4" tall to be passed through. Drop in design requires a counter at least 3-1/4" thick for flush mounted installation. Brushed stainless steel finish resists nicks and scratches. Custom size units are available on special order.
|UL Level 1 & 3||14"||14"||3-1/8"|
Non-Ricochet Bullet Resistant Deal Trays have a specially shaped inner curved design that will provide more effective bullet resistance. The shape assists in retaining the bullet inside the tray or directing it towards the glass above, depending upon the angle of entry. These trays are designed as drop in units. Brushed stainless steel finish resists nicks and scratches. Custom size units are available on special order.
|UL Level 1||12"||11"||1-3/4"|
|UL Level 1||16"||11"||1-3/4"|
|UL Level 3||12"||12"||2"|
|UL Level 3||16"||12"||2"|
Our Package Receivers feature a 12" wide x 10" high vision panel in the interior door. This enables the user to see the contents inside the unit. The exterior door is solid opaque stainless steel. The exterior door is hinged on customers left side.
|UL Level 1 & 3||8-1/2"||16"||18-1/2"|
Our Clear Package Receiver is designed for interior use only. Can be installed on the counter top or flush mounted into transaction counter. A special interlocking mechanism allows only one door to open at a time. Closer furnished on customer side door. Contents can be clearly viewed from the top and all four sides. Handling is determined by hinge placement on customer's side.
|UL Level 1 & 3||L or R||18-1/2"||16"||18-1/2"|
Our Transaction Drawers are ideal for drive-up and walk-up service. A lexan lid allows a clear view of the contents while preventing direct entry of outside air. Stainless steel front panel of unit pivots up as drawer is extended. Drawer is weather-resistant. Push button latch keeps drawer lid locked when closed. The Oversized Transaction Drawer is perfect for convenience stores and is ideal to transfer a gallon of milk or 2 liter bottles of soda. Standard Large Capacity and Oversized Transaction Drawer are offered for both the Counter Mount and Thru-Wall models. Drawer contains a coin tray and bill clip.
|Protection Level||Style||Mounting Type||Width||Depth||Height|
|UL Level 1||Large Capacity||Counter||19-1/2"||24-3/8"||11"|
|UL Level 1||Large Capacity||Thru-Wall||19-1/2"||24"||11-5/16"|
|UL Level 1||Oversized||Counter||19-1/2"||27-1/8"||15-5/8"|
|UL Level 1||Oversized||Thru-Wall||19-1/2"||27"||16-3/4"|
The TTU-3™ high security tamper resistant 2-Way Talk Thru electronic communication systems offer four models to select from and several additional options.
The TTU-3™ 2-Way Talk Thru communication systems are designed for times when it is impractical to have a communicator mounted on a isolation barrier with a hole cut through the glass. This type of installation weakens the glass when the hole is cut through it. The prism shaped units are ideal for mounting on a counter top on both sides of a glass barrier. The TTU-3™ is a vox system, enabling the attendant and the customer to have hands-free two-way communication.
The TTU-3™ provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. Its compression circuitry decreases loud, annoying sounds.
The TTU-3™ now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone.
The System Offers Multiple Options:
Bullet Resistant Speak-Thru
This U.L. Level 3 / NIJ Level 3-A bullet resistant Speak-Thru is 6" in diameter and designed to be used where a Speak-Thru located into the glazing is desired. This Speak-Thru will acommodate glazing thicknesses from 3/4" to 2-1/2". This unit is comprised from circular louvers that are designed to deflect projectiles, yet will not interfere with normal conversation, and has a brushed stainless steel finish. Optional spacer rings will be required for glazings under 1-3/16" thick.
Forced Entry / Ballistic Resistant Speak-Thrus
|Requires 6" Hole||Requires 5" Hole||Requires 4" Hole|
The brushed stainless steel Speak-Thru provides natural voice transmission through the window glazing. This style Speak-Thru comes in three sizes, 5" diameter, 6" diameter and 7" diameter units. These units will acommodate glazing thicknesses from 1/4" to 2". The offset slots in the front and rear plates prevent drafts and tampering from the outside. The forced entry resistant speak thru models are SSFE5, SSFE6, and SSFE7 and the ballistic resistant models are SSBE5 SSBE6 SSBE7.
Pinnacle Armor's PGP round externally operated configured gun ports are designed for use in flat transparent or opaque armors. They have ballistic threat resistance levels from handgun threats up to and including level 4 armor piercing rifle threats. The external operation refers to the external knurled operation knob outside of the round mount. Operation requires removal of the spring pin, then lifting upward over the top into the horizontal locked over position.
The PGP-3 is designed to be mounted on to the armor with a 3" diameter hole, to facilitate a 2" small opening for handgun return fire operation. The PGP-3 is 5" in outside diameter. The PGP-1 and PGP-2 are designed to be mounted utilizing a 5" and 7" diameter hole, with a 4" and 6" opening to facilitate the operation of shoulder deployed firearms with various dimensioned large front sight apertures, such as the triangular front sight utilized on the M-16 rifle. The PGP-1 and PGP-2 are either 9" or 12" in diameter based upon the 4" or 6" opening requirements.
The gun ports are gravity pivot operated by the release of a tamper resistant locking pin.
|NIJ Level III ballistic operable round configuration gun port||NIJ Level III-A ballistic operable round configuration gun port||NIJ Level IV ballistic operable round configuration gun port|
|This photo shows the ballistic tube section which protects the glass walls of the mounting hole.
||This photo shows the PGP 1 with a 6" opening in the closed and locked position.
This photo shows the PGP-1 with a 6" opening in the full open position.
Pinnacle Armor's MBGP rectangular internal configured gun ports are designed for use in flat transparent or opaque armors. They have ballistic threat resistance levels from handgun threats up to and including level 4 armor piercing rifle threats. Operation is simple. Pull the knob slightly to the side and roll upward into the full open position.
This gun port is manufactured from ballistic grade steel, aluminum and stainless steel alloys.
|Internal Safe Side ||Internal Safe Side
|This picture shows the MBGP gun port in the closed and locked position.
||This photo shows the MBGP gun port in the fully open position.
|External Strike Face||Side Profile
|This photo shows the outside the strike face of the MBGP gun port. You can see full ballistic protection through the mounting hole location.
||This side view shows the depth profile of the MBGP gun port, designed in this configuration for a 2" nominal thickness mounting.
Ballistic assemblies are manufactured with the following exterior materials:
Explosive Blast and Forced Entry resistance assemblies are manufactured with the following exterior materials: