• Gallery
• Armors
• Glazing
• Clear Vue
• Containment Device
• Cockpit Door
• Composite Hatches
• Vault Door

Glazing

Downloadable Information

 Security Glazing Article

Pinnacle Armor provides glazings to meet the varied ballistic, explosive blast and forced entry threat levels, while maintaining architectural considerations such as nominal thickness, weight and load bearing requirements, air-space/insulating building codes and detention requirements. Glazings are designed for either interior or exterior applications. Heat or chemical treated compositional make-ups are available. However, these treatments have both positive and negative physical performance capabilities that should be addressed prior to specification.

All security glazings are offered with four performance requirement options:

• Non-certified - tested equivalent
• Certified to testing requirements
• Low spall requirements
• No spall requirements

• Glass
• Glass-clad
• Return Fire

Laminated Glass Options

Click Image To Enlarge

Standard Coloring
Clear Green Gray	Blue Bronze Blue-Green	Azurlite Evergreen Very Clear
Tinting / Solar control properties

Laminated Ballistic Glass Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)
UL 752 Level 1	1.1875"	68	16
UL 752 Level 2	1.500"	65	21
UL 752 Level 3	1.750"	62	25
UL 752 Level 4	2.000"	60	28

Laminated Physical Security Glass Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)
UL 972	.31"	87	3.6
UL 972	.43"	86	5.2
UL 972	.51"	85	6.5

Glass Clad Polycarbonate Options

Standard Coloring
Clear Green Gray	Blue Bronze Blue-Green	Azurlite Evergreen Very Clear
Tinting / Solar control properties

Ballistic Glass Clad Polycarbonate (GCP) No Spall Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)	Symmetrical (Balanced)
UL 752 Level 1	.760"	75	6.4	Yes
UL 752 Level 2	1.18"	75	11.5	Yes
UL 752 Level 3 & 6	1.24"	67	10.7	Yes
UL 752 Level 4	1.42"	69	15.5	No
UL 752 Level 5	1.64"	68	18.3	No
UL 752 Level 8	2.89"	55	27.2	No

Ballistic Glass Clad Polycarbonate (GCP) Lo Spall Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)	Symmetrical (Balanced)
UL 752 Level 1	.937"	75	10.2	Yes
UL 752 Level 2	1.125"	70	13.2	Yes
UL 752 Level 3	1.31"	68	14.8	Yes
UL 752 Level 4	1.43"	67	15.2	Yes

Detention / Physical Security Glass Clad Polycarbonate (GCP) Glazing Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)	Symmetrical (Balanced)	Spall Low / No
H.P. White TP-0500.01 Level A-1 Approx. 5-8 Minute	.47"	86	4.6	YES	LOW
H.P. White TP-0500.02 Level A1 Approx. 8-10 Minute	.53"	86	5.0	YES	LOW
H.P. White 0500.01 Level A1 Approx. 10-15 Minute	.59"	85	5.3	YES	LOW
H.P. White 0500.02 Level B1 Approx. 15-18 Minute	.61"	85	5.4	YES	NO
H.P. White 0500.01 Level B1 Approx. 18-22 minute	.72"	84	6.2	YES	LOW
H.P. White 0500.02 Level B2 WMFL Level III, 30 Minute Approx. 30-36 Minute	.73"	84	6.2	YES	LOW
H.P. White 0500.02 Level B2 H.P. White 0500.02 Modified .357 Magnum WMFL Level III, 30 Minute Approx. 38-50 Minute	.75"	84	6.3	YES	LOW
H.P. White 0500.02 Level B2 H.P. White 0500.02 Modified .357 Magnum WMFL Level II, 60 Minute Approx. 60 minute	.87"	83	7.0	YES	LOW
H.P. White 0500.02 Level C3 WMFL Level I, 60 Minute Approx. 60-70 Minute	1.25"	79	10.5	YES	LOW

Return Fire Composite Options

Standard Coloring

Clear Bronze Gray

Return Fire Ballistic Laminate Glazing Options:
Protection Level	Thickness	% Light Transmission	Weight (Lb./Sq. Ft.)
NIJ - 2A UL 752 Level 2	.813"	89	4.3
NIJ - 2 UL 752 Level 2	.938"	88	5.7
NIJ - 3A UL 752 Level 3, 6	1.06"	87	6.3
NIJ - Special UL 752 Level 7	1.62"	86	9.5
UL 752 Level 4, 5	1.50"	75	15
UL 752 Level 8	2.62"	83	16

Click Images Enlarge
Front - Threat Side • 4 impacts from a 7.62 mm x 39 mm rifle. Center hole is exit hole from the rear side return fire shot.	Rear - Safe Side • 4 impacts from a 7.62 mm x 39 mm rifle. No penetration from the 4 outer bullet impacts. Center hole is the entrance hole from the return fire shot.