Standard Vault Door
The solid steel water resistant floor vault door has multiple applications with uses in the maritime, petroleum, military and high threat profile commercial sectors. The dimensions internally are client specific. The unit depicted allows for 46 inches of egress area for individuals with SCBA gear and/or full combat packs to move through. The unit is capable of sustained multiple repeat hits from 7.62mm machine gun with armor piercing ammunition. The door lid is spring assisted for easy one hand opening with a solid locking bar to preclude accidental or forced closing.
The floor vault door comes with a continuous mounting flange for weldable mounting (shown) or modified for bolt-on mounting. Ballistic resistant capabilities designed to end-user specifics.
 • Inside view of opened vault door. Visible is the water resistant seal, spring assist units, double overlap edges, continuous mounting flange, and dual locking clamps. |
 • View of closed vault door lid with low profile non-skid diamond plate cover in a closed and locked position. |
 • Close-up of internal view of the dual locking clamps. |
 • Inside view of opened vault door. Visible is the water resistant seal, spring assist units, double overlap edges and continuous mounting flange. |
 • Close-up of locking clamp. |
High Threat Vault Door
 |
| This photo shows the air & water tight seal. The stainless steel hardware, spring latch and lever, the gas-spring assist and solid ball detent locking bar. |
The solid steel air and water tight floor vault door has multiple applications with uses in the maritime, petroleum, military and high threat profile commercial sectors. The dimensions internally are client specific. The unit depicted allows for 54 inches of egress area for individuals with SCBA gear and/or full combat packs to move through. The unit is capable of sustained multiple repeat hits from 12.7mm heavy machine gun with armor piercing ammunition. The door lid is gas-spring assisted for easy one hand opening with a solid locking bar to preclude accidental or forced closing.
The floor vault door comes with a continuous mounting flange for weldable mounting (shown) or modified for bolt-on mounting. Ballistic resistant capabilities designed to end-user specifics. The hinges are custom made; brass sleeved to allow for easy operation even in a maritime environment.
|
|
|
|
 |
 |
| These two photos show the gas-spring assisted arms and the ball detent locking bar to preclude premature closing | |